Rubber roller for stamping

Correct storage of idle Rubber Rollers:
For the storage of the Rubber Roller, we need to wash the rubber roller with clean water, and then seal it with a plastic film to prevent it from contacting the air, and then place it in a good storage place. It must not be tilted around, which will affect its internal mechanical properties. and rubber surface quality. Do not throw, place, press or press heavily, and keep the roller core unbiased or bent to ensure normal use of the roller core.Plastic Roller
The rubber roller head and bearings should be kept well lubricated. The accuracy of the rubber roller head and bearing directly affects the effect of ink transfer and ink distribution. If poor lubrication causes wear and clearance of the rubber roller head and bearings, it will inevitably lead to uneven printing ink color. At the same time, printing marks may also be caused by bad conditions such as glue skipping and glue slipping. Therefore, you should frequently add lubricating oil to the rubber roller shaft head and bearings to prevent wear and tear of the rubber roller during normal use and improve printing quality.Silicone Roller
Newly cast rubber rollers should not be put into use immediately. Since the internal structure of the newly cast rubber roller is not stable enough, if it is put into use immediately, the service life will be easily reduced. Therefore, the new rubber roller that has just come out of the barrel should be left for a period of time so that the rubber roller can maintain a relatively stable state after contacting the temperature and humidity of the external environment. This can increase the toughness of the colloid and thereby improve the durability.

Polyurethane Roller